Nikon D7000, Stabilizing the Situation

Must Read

Ads Are Already Being Leaked On The Internet

Time is ticking and as each day ends, we are another 24 hours closer to Black Friday 2010. While...

What to Do During a Traffic Stop For DUI Suspicion

Being pulled over on suspicion for DUI can be a scary thing. Whether you think you're guilty or not,...

Bill Consolidation Loans – Consider These 3 Options to Eliminate Debt Quickly

It is certainly possible to repay all your debts a lot faster than you would have thought possible. There...
Admin
test

If you purchased your camera with the Vibration Reduction (VR) lens or if you have the kit lens, you already own a great tool to squeeze two stops of exposure out of your camera when shooting without a tripod. Typically, the average person can hand-hold his camera down to about 1/60 of a second before blurriness results due to hand shake. Even if you have pipes as big as Mr. T’s you need to use this feature. As the length of the lens is increased (or zoomed), the ability to hand-hold at slow shutter speeds (1/60 and slower) and still get sharp images is further reduced (Figure 8.3).

Turning on the VR switch will allow you to shoot in lower lighting conditions while reducing hand shake. I love this feature— especially if I haven’t had my morning coffee.
Figure 8.3 Turning on the VR switch will allow you to shoot in lower lighting conditions while reducing hand shake. I love this feature— especially if I haven’t had my morning coffee.

Hands off to sharper images

Whether you are shooting with a tripod or even resting your camera on a wall, you can increase the sharpness of your pictures by taking your hands out of the equation. Whenever you use your finger to depress the shutter release button, you are increasing the chances that there will be a little bit of shake in your image. To eliminate this possibility, try setting your camera up to use the Self-timer or Exposure Delay mode (Figure 8.4).

A portrait needs to be sharp, and by using the Selftimer or Exposure Delay you reduce the chances of camera shake.
Figure 8.4 A portrait needs to be sharp, and by using the Selftimer or Exposure Delay you reduce the chances of camera shake.

Self-timer

  1. To turn on the Self-timer simply press the release dial lock and rotate the release dial to Self-timer (A).
  2. Press the Menu button to find the Custom Setting menu. Highlight and select C Timers/AE Lock, then press OK (B).
  3. Select C3 Self-timer and click OK. I generally choose 2S (2 seconds) to cut down on time between exposures (C).

C3 Self-time

 

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Latest News

Top 10 Provinces of Thailand Not to be missed for Travel

10 SuratthaniThe source of the proverbial Chaiya salted egg. Surat Thani is a province with many attractions,...

Underlight As Accent, For Power and The Main Light for Photography

Underlighting, in which fill or accent light comes from under the topic, is not widely used technique in the traditional Portraits, even though it will have...

How To Fix Overexposure As A Creative Tool, The Complete Guide

As an creative tool, overexposure is sort of underrated. What I’m close to propose could be a deliberate and well thought out technique for...

7D Mark II is Canon’s best DSLR cameras without full-frame sensor.

The expected long-awaited Canon EOS 7D Mark II are shipping in November for $ 1,799 without a lens. With a higher price tag, you...

Low key photography and How to isolate your subject.

Low key photography doesn’t depend on underexposure to make its point; the key to low key is that the majority of tones, even correctly...

More Articles Like This